Poly X50 & TC8 Touch Panel Bundle

The Poly TC8 is a 8″ touchscreen device that allows you to start and control your video conference. The TC8 also includes an integrated calendar to set up meetings with the date and time decided.

The Poly X50 is simple to reset, just simply insert a paperclip into the factory reset pinhole on the side of the Poly X50. This will reset the device.

1. Procedure.
2. Plug the AC power cord of the PoE injector into the wall.
3. Connect the PoE injector to the TC8 device using a LAN cable.
4. Connect the PoE injector to your network with a LAN cable.

1. Disconnect the LAN cable from the device to power it off.
2. On the back of the device, insert a straightened paper clip through the factory restore button pinhole (the pinhole has a raised dot, at both the top and bottom of the ventilation hole).
3. While continuing to hold the restore button, reconnect the LAN cable to power the device on. Don?t power off the device until it finishes the factory restore process.

You must unpair the TC8 device if you no longer want to use it with a particular video system.
Don?t unpair devices if you plan to use them with the same system. For example, if you move your videoconferencing equipment to another room, just disconnect and reconnect the devices in the new location.
Procedure
1. In the system web interface, go to General Settings > Device Management.
2. Under Connected Devices, find the device by its MAC address (for example, 00e0db4cf0be) and select Unpair.
The unpaired device moves from Connected Devices to Available Devices (which shows discovered devices you can pair with the system).

The TC8 device software updates when you update the paired video system. To update the device, see your video system?s Administrator Guide at the Poly Documentation Library.

During a call, you can change from the current layout to another layout better suited for the meeting. The layout frames include the near site and far site.
If you?re sharing content on a single monitor, content displays in one of the frames.
Procedure
1. In a call, go to Layouts.
2. Select one of the following layouts:
? Equal: All participants are the same size.
? Gallery: Participants display at the top of the screen and the speaker displays in the main frame.
? Fullscreen: The active speaker displays in full screen.

When camera tracking is on, the camera automatically frames the group of people in the room or the current speaker (depending on your camera and how your system is configured).
Procedure
1. From the right border of your screen, swipe left.
2. Select Camera Settings.
3. Select Tracking On or Tracking Off .

Poly TC8 is?pre-paired out of the box when purchased as part of a full Poly video solution. Power over Ethernet means only one cable is required, so keeping your table clean is a breeze. The interface makes it easy to personalize your experience for more productive meetings.

To enhance the view of meeting participants, make adjustments to the in-room camera.
If camera tracking is on, camera control is unavailable. Turn tracking off to access camera controls. You can only make camera adjustments during a call.
With the Studio X50 and Studio X30 systems, you can?t pan or tilt the camera if it?s zoomed all the way out.
Procedure
1. From the right border of your screen, swipe left.
2. Go to Camera Settings > Camera Controls.
3. Press + to zoom in or – to zoom out. Press the arrows to tilt up and down or to pan left to right.
4. To exit the control screen, select Back .

The default password is?the last six characters of the serial number listed in System Details and on the back of the device. Remote Access Password If you set this option, you must enter this password to access the system through the system web interface or command-line API (SSH or telnet).

Poly Device Mode?enables you to use the system’s camera, speaker, microphone, and connected monitors from your computer. Once you connect the system to your computer with a USB cable, you can control the video system’s camera and audio features using your computer’s third-party conferencing application.

1. Enter the IP address of the device in a web browser to open the System Web Interface.
2. Go to General Settings > Device Management.
3. Select Check for Updates.
4. The system will find a software version for the device. …
5. Select Update All.

In the system web interface,?go to Network > Primary Network > IP Addresses. 2. For IP Address, select Obtain IP address automatically.

If your space isn?t equipped with Power over Ethernet (PoE), you can use a PoE injector to power the TC8 device.

Procedure
1. Plug the AC power cord of the PoE injector into the wall.
2. Connect the PoE injector to the TC8 device using a LAN cable.
3. Connect the PoE injector to your network with a LAN cable.
If you purchased the device with your video system, the two automatically pair once the device powers on.

Because the TC8 device gets power through the LAN, the connection must support Power over Ethernet (PoE).
Procedure
? Connect the TC8 device to your network using the supplied LAN cable. If you purchased the device with your video system, the two automatically pair once the device powers on.